GripAce Exile customThis Russell Mitchel / Exile Cycles customized Harley-Davidson has the GripAce button pad installed in the left handlebar for thumb operation

Grip Ace Digital Switch Kits for Harley-Davidsons
The Grip Ace™ universal digital motorcycle switch kits
Grip Ace™ digital switch kit replaces the stock Harley-davidson handlebar
Switches or adds switches to custom motorcycles. The four-push button rubber switch pad gives 6 different switch functions. The switches in the kit are used to control Starter, hi/lo headlights, turn signals, hazards and Horn. The system can also control other functions needing switches.

The Grip Ace™ switch pad can be installed in the grip, handlebar, or the bike itself, under the gas or oil tank, in triple tree, frame etc. Wire your handlebars in minutes. The Grip Ace™ switch pad can be fitted into most stock and aftermarket rubber or billet (aluminum) grips by cutting or machining an opening in the grip and gluing the switch pad to the grip or handlebar.
Grip Ace™ also offers the service of machining of grip and installing the switch pad.

Open GripAce V-Twin / Custom Brochure PDF

Current Available Grip Ace Kits for Harley-Davidson*

The Grip Ace™ Universal Digital Motorcycle Switch Kit - Order Below
Grip Ace™ Digital Switch Kits for Harley-Davidson - Coming Soon!
   Preinstalled in 1-inch dia. hand grips for popular Harley-Davidson applications. Complete with plug-in wiring adapter.

• Please note the most Harley-Davidson stock switches are located in the stock hand lever assemblies.
So the stock Harley switches will remain unless you also change to one of the many aftermarket lever assemblies
not containing switches. Grip Ace plans to offer 1-inch dia. Complete Lever Kits in the near future.

GripAce Universal Digital Motorcycle Switch Kits / Parts

Grip Ace Universal Kit

Above: The Grip Ace™ Universal Digital Motorcycle Switch Kit

Exile Cycles Modified Grip Kits for GripAce Digital Switches

Exile Cycles Grip Sets for use with GripAce
Exile Cycles offers the GripAce Digital Switch Kit with the Rubber Switch Pad installed in 4 different styles of
Exile 1-inch handlebar grip sets for Harley type handlebars. Exile can also supply the GripAce System.
Exile Grip Sets with GripAce Button Pad cutout in the Left Grip are priced as follows:

Black Rubber $49/pr • Brushed Satin Aluminum $149/pr • Polished Aluminum $159/pr • Black Anodized Aluminum $169/pr
GripAce Digital Switch System $399

Contact Exile Cycles direct to order at Exile/ / phone (01) 818-706-1230 USA

Grip Ace Kit for Harley-Davidson

AVAILABLE SOON! Above: The Grip Ace™ for Harly-Davidsons includes a matching set of custom grips with the push button pad installed in the right grip. Click to Enlarge

GripAce Universal Digital Motorcycle Switch Kits / Parts

Return Home

GripAce Custom Bike Brochure PDF

Open GripAce
Custom Bike Brochure

Frequently Asked Questions:

1. Why use the Grip Ace™ system?
A. Clean handlebars, major cost saving when wiring bars, you're legal.

2. Will my GRIP ACE™ work with any motorcycle?
A. Your GRIP ACE™ will work with any basic, standard wired stock or custom motorcycle.

3. Will my GRIP ACE™ work on 7/8 or 1” handle bars?
A. Your GRIP ACE™ will work with both 7/8 and 1” handle bars. Just specify which size when ordering.

4. Can my GRIP ACE™ switches be fitted to any grip?
A. In most cases YES, if grip to be fitted meets a specified size to accommodate the switch pad.

5. Will my GRIP ACE™ work with my stock self canceling turn signal module?
A. Yes, your GRIP ACE™ uses the same signal as the stock switches to activate the stock self canceling turn signal module.

6. What can my GRIP ACE™ system control on my motorcycle?
A. Starter, turn signals, hi beam headlight, horn, L.E.D lights, video cameras, audio recorders, CD player, nitrous oxide, air ride systems, slammer systems. If you have a custom application request, let us know.

7. Where can my GRIP ACE™ module be mounted?
A. Your 1” by 1” by 5.25” module can be mounted anywhere away from severe heat, and away from all ignition components. It can be under your fuel tank or next to your battery, under your seat, oil pan or in your fairing.

8. Can I get a custom program made for my GRIP ACE™ system?
A. Yes, inquire with us.

9. How many amps will my GRIP ACE™ system use?
A. 1 amp or less.

10. How many amps can my GRIP ACE™ system operate without a relay?
A. Your GRIP ACE system can operate any accessory up to 5 amps. Over 5 amps, you must use a relay to handle load.

11. Can my GRIP ACE™ grip wire be cut and fed through my handle bars and frame, then reconnected?
A. Yes, connect your red wire to the red wire and black to the black.

12. Can I use 2 GRIP ACE™ systems on my motorcycles?
A. Yes.

13. What’s the warranty of my GRIP ACE™?
A. 2 Years

14. Can I install my GRIP ACE™ myself?
A. If you have basic knowledge of your bikes wire diagram and switching functions, then it’s a no brainer, simple.

15. Where can I get my GRIP ACE™ installed?

A. Any local shop can wire it in for you. If they or you have questions then call or email us for assistance.

16. Must I remove any stock switches on my motorcycle?
A. NO. All stock switches can remain fully functional because no wires are cut for this type of installation. You can remove all the switches if desired. If stock switches are removed you must hard wire the engine run switch and the clutch switch. Very simple. Your ignition key will shut the bike off and remember you are customizing.

Iron & Lace Calendar
Click to Order

GripAce Digital Switches are used on many of the motorcycles featured in the Iron & Lace Calendars